Composants Principaux - Joannes DRY 20 Handbuch

ASSEMBLY OF PROGRAMMING CLOCK KIT
1
0
1
RES
ET
2
1
3
0
4
To install the timer clock unscrew the panel 1 and remove
the housing cover 2 with cutting pliers.
Install the timer as illustrated in the figure and connect it
up as shown in the diagram.
PROGRAMMING
By turning the programme disc clockwise the day time can be adjusted as with a normal clock. The setting
times are selectable by lowering the adjustable levers for each 15 minutes (each lever).
connection
terminals switch
230 V 50/60 hz 16 A - 250 V
The levered switch, situated close to the pointer needles, allows the following three possibilities:
1 with the lever on "I" position the heating operation of the boiler is excluded;
2 with the lever on "O" position the boiler remains in continuous heating operation, controlled by the
boiler thermostats and the room thermostat;
3 with the lever between "I" and "O" positions, the boiler automatically operates for heating, according
to the programme set up by the User with the adjustable levers.
58
0
1
RES ET
2
1
3
0
4
2
Fig. 18

COMPOSANTS PRINCIPAUX

TABLEAU DE BORD DRY
Témoin Thermostat
de fonctionnement de réglage chaudière
Interrupteur
Thermomanomètre Marche/Arrêt
1 Elément avant
2 Elément intermédiaire
3 Elément arrière
4 Nipple
5 Prise de raccordement carneau
6 Plaque porte brûleur
Témoin
de blocage brûleur
Thermostat Predisposizione
de sécurité orologio programmatore
Fig. 2
Fig. 3
7 Isolant plaque porte brûleur
Volet de nettoyage
8
9 Isolant volet de nettoyage
10 Robinet de vidange
Trous pour serre-câbles
11
23