Proper Use; Technical Data - Gardol GHH-E20Li Originalbetriebsanleitung

•
Complete handle
•
Complete tube with motor unit
•
Shoulder strap with safety release
•
Chain saw mounting kit
•
Cutter bar
•
Saw chain
•
Cutter guard
•
Hedge trimmer mounting kit
•
Guard for hedge cutter blade
•
Battery pack 20V/3 Ah
•
Charging unit
•
Original operating instructions
•
Safety instructions

3. Proper use

Pole-mounted pruner (chainsaw with
telescopic handle)
The chain saw mounting kit is allowed to be used
only on the supplied motor head.
The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
Hedge trimmer
The hedge trimmer mounting kit is allowed to be
used only on the supplied motor head.
Caution! This hedge trimmer is suitable for cutting
hedges, bushes and shrubs. Caution! Do not use
this equipment to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GHH_E_20_Li_SPK7.indb 24 Anl_GHH_E_20_Li_SPK7.indb 24
GB

4. Technical data

Pole-mounted pruner
Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 170 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.050") 1.3 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed
at rated rpm: ...........................................3.76 m/s
Oil tank capacity: ................................... 125 cm3
Net weight without accessories: .................3.4 kg
Saw chain: ..............................Oregon 91P033X,
.......................................Kangxin 3/8 8050X33DL
Cutter bar: ....... Oregon 080NDEA041 (520089),
........................................ Kangxin AP08-33-507P
Hedge trimmer
Cutter bar length: ................................... 450 mm
Max. cutting length: ................................ 400 mm
Tooth spacing: .......................................... 16 mm
Cuts/min: ..................................................... 1700
Lithium-ion battery
Voltage: .................................................. 20 V DC
Capacity: ................................................... 3.0 Ah
Charging time: ............................................. 1.0 h
Charging unit
Input voltage: .....................200-250 V ~ 50-60 Hz
Power rating: .............................................. 72 W
Output voltage: .................................. 10-21 V DC
Output current: ............................................... 3 A
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L sound pressure level ................... 81.05 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
LWA sound power level measured .. 98.23 dB(A)
K uncertainty ............................................. 3 dB
WA
LWA sound power level guaranteed ... 102 dB(A)
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
- 24 -
12.05.15 15:58 12.05.15 15:58