Technical Characteristics - Comelit SimpleHome Technisches Handbuch

SimpleHome bus isolator/repeater art. 20002700
The SimpleHome bus isolator allows regeneration of the bus between two or
more sections of the system.
Power supply voltage
Consumption
Bus connectors*
Indications
Positioning
Approvals
Operating temperature
Dimensions
BUS1-BUS2 CONNECTION TERMINALS
Terminal
-
+
D
• Must be used in SimpleHome systems with over 40 modules.
• Must be installed on bus sections to create "device islands" of no more than 40 modules.
• The isolator must not be programmed and should not be recognised as a module in the
SimpleHome BUS system, therefore it will not have a serial number or address setting.

TECHNICAL CHARACTERISTICS

24 Vdc ± 5%
10mA
2 terminal blocks with 3 poles
LED1 flashing: bus1 data transmission
LED2 flashing: bus2 data transmission
LED steady: power supply negative failure or device
not connected correctly
DIN rail on a dedicated control panel or in junction
boxes
CE
0° to 40°C
42 x 42 x 18 mm (1 DIN module)
Function
Bus power supply negative
Bus power supply +24 Vdc
Bus data line
JP1
Allows connection of
power supply and bus.
Interrupts power supply.
Allows connection
of bus.
5