Pipeline EVOLUTION 2 Bedienungsanleitung Seite 6

03 CLEAROMIZER FILLING
Fill the clearomizer with eliquid taking care not to ex-
ceed the upper edge of the centre tube, then retighten
the base. Please wait a short time after filling so that
the wicks are saturated with eliquid (five minutes).
Maximum
filling limit
04 ASSEMBLY
Screw the Clearomizer onto the battery.
Do not put liquid
in the centre tube.
05 USING YOUR PIPELINE
It is IMPORTANT to use the correct technique.
To inhale, do not take a quick 'puff', but rather
take a medium to long slow drag / draw in regularly.
You will recognise the correct technique by the
abundant amount of vapour produced.
The PIPELINE eCigarette will only work while the button
is pressed. Press the button and inhale simultaneously.
Release the button after inhalation. Whilst the button is
pressed the LED will light up.
The Clearomizer units have wearing parts (coil head
without warranty) and can easily be replaced.
06 REPLACEMENT OF CLEAROMIZER COIL HEAD
Unscrew the clearomizer from the battery,
open the clearomizer, unscrew the coil
head from the base and replace with a
new one then refer to
03 CLEAROMIZER FILLING,
for instructions.