Vivanco IPAU 1000 Bedienungsanleitung Seite 3

technologies. However, you can save even
more electricity or money, if you disconnect
it completely from the mains in the case you
do not need it for a longer time. Vivanco
recommends to use switched outlet strips.
CONFORMITY WITH EU ST ND RDS
The product complies with the European
safety standards and with the other
prescriptions and is produced according to
the GS prescriptions for "Proofed Safety".
Upon request, the CE Declaration of
Conformity is available from Vivanco.
Commissioning
P R I O R to connecting the power adapter
with the device or the mains, make sure the
output voltage (V), the output current (m )
and the
polarity comply with the device used.
OUTPUT VOLT GE (Uo/V)
The output voltage of 5 V is the standard for
USB devices.
OUTPUT CURRENT (I max./m )
Please make sure the device connected
does not consume more electricity than
permitted by the max. output current of the
power adapter. In case the max. load is
exceeded, the power adapter may be
damaged due to overload.
Operation
Do not put the output plugs of the device
into any sockets.
USB charging function: Some devices may
not be charged even if they are properly con-
nected. This is no error of the power adapter
but indicates that it is necessary
to use special USB power adapters for
operating such devices. Please contact
Vivanvo for relevant power adapters or ask
your local dealer.
Contact
For our contact data please have a look in
the attachment or at www.Vivanco.com.
3