Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Welding Helmet - Item no. 9036662
Description: Welding mask with automatic strength control to protect against UV
(ultraviolet) and IR (infrared) radiation.
Intended use: Use the welding helmet only as described in the manual. All other use
is deemed incorrect.
Safety:
•
Always use a welding mask for electric arc welding.
•
Personal protective equipment must always be complete and undamaged.
•
Radiation from electric arc welding can cause eye damage.
•
Must only be used for electrode and CO
Start-up/use:
Clean the glass before each use.
Set the rotary knob as follows:
40 – 80 A
80 – 120 A
10
Set the delay switch according to the welding task. Set to the longest possible time.
Temperature range: -5 °C to +55 °C. The effect is reduced outside this range.
The welding glass adjusts its strength automatically according to the radiation.
Customise the helmet to fit your head by turning the hand screw on the rear.
P. Lindberg A/S
Tel.: +45 70 21 26 26
120 – 175 A
11
12
Sdr. Ringvej 1
DK6600 Vejen
welding.
2
175 – 300 A
300 – 450 A
13
2
450 – 600 A
14
15
MAN 9036662 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk
Werbung
