Werbung
Verfügbare Sprachen
Verfügbare Sprachen
» Coldness or heat, direct sunlight
» Dust or flammable gases, vapors or
» Solvents
» Strong vibrations, impacts, shocks
» Strong magnetic fields such as in the vicinity of machines or loudspeakers
• Never pull the cable to remove the plug-in power supply from the power socket. Hold it at the side of
the housing and then pull it out of the socket.
• When operating the product, ensure that there is sufficient air circulation and do not cover the product.
• Always lay the cable carefully so that nobody can trip over it. There is a danger of injury.
• Ensure that the low voltage cable of the plug-in power supply does not get crushed or twisted or
damaged due to sharp edges.
• Never pour liquids over electrical devices and do not put any objects filled with liquid (e.g. vases) on top
of them or in their vicinity. There is a great risk of a fire or a life-threatening electric shock.
• If the power supply exhibits signs of damage, do not touch it as there is a danger to life due to electric
shock!
• First switch off the mains voltage for the power socket to which the power supply is connected (switch
off the associated circuit breaker or remove the fuse, then disconnect the FI circuit breaker so that the
power socket is shut off from the mains voltage at all poles). Then pull the power supply out of the
power socket. Dispose of the damaged device in accordance with environmental regulations and do
not use it further.
• Never leave the packaging in a careless manner as this could be a dangerous toy for children
• Handle the product carefully. It can be damaged by impacts, shocks or even by falling from a short height.
EU conformity
The manufacturer hereby declares that the product conforms to the relevant European directives.
The complete text of the EU conformity declaration is available at the following Internet address:
http://www.globtek.com/pdf/iso_certificates/EC-DECLARATION.pdf [globtek.com]
Startup
lmportant!
The output voltage of the power supply must correspond to the input voltage of the electrical device that
is connected to the power supply. If this is not adhered to, the power supply and the connected devices
will be destroyed. This voids the warranty/guarantee.
• Please install the corresponding country adapter that is appropriate for the power socket.
• When connecting to the device, ensure that the polarity of the plug-in connector is correct.
• If the device has an on/off switch, this is how you switch on the device. If this does not function correc-
tly, switch it off immediately and check that the cable connection is correct (polarity).
Maintenance and cleaning
You do not need to perform maintenance on the plug-in power supply. Do not ever dismantle it.
Remove the power supply from the power socket prior to cleaning.
A dry, soft, clean cloth is sufficient for cleaning. Do not use any aggressive cleaning agents as this can
result in discoloration. Do not press too heavily on the surface when cleaning. This helps avoid scratch
marks.
Disposal
Dispose of the product at the end of its service life in accordance with the applicable
statutory provisions. Within the European Union, this symbol indicates that this
product must not be disposed of in domestic household waste. Old devices contain
valuable recyclable material that should be re-used in order to prevent the
environment and human health from being damaged due to unregulated waste
disposal. For this reason, please dispose of old devices via appropriate collection
systems or send the device for disposal at the place where you bought it. This is
where the device's materials will be sent for recycling.
Statement of warranty
In accordance with statutory warranty claims, the manufacturer provides a warranty according to the laws
of the respective country. The warranty is always for at least 1 year (2 years in Germany). The warranty
begins as of the date on which the device was sold to the end consumer.
The warranty only covers defects attributable to material or manufacturing errors.
The following cases are excluded from the warranty:
• Normal wear
• Improper uses such as overloading the device or unapproved accessory parts
• Damage due to third party interference, use of force or foreign objects
• Damage arising from non-adherence to the instruction manual such as connecting to the wrong mains
voltage or non-adherence to the assembly instructions
• Fully or partially dismantled devices
Legal notice:
GlobTek, lnc.
186 Veterans Drive, Northvale, New Jersey 07647, USA
Importer:
produced by GlobTek Inc. www.globtek.com
W&H Dentalwerk Bürmoos GmbH
Ignaz-Glaser-Straße 53, 5111 Bürmoos, Austria
All rights reserved.
Werbung
