Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating lnstructions
Model: GTM96300-3036-6.0-R2
Universal power supplies (external, plug-in
power supply with interchangeable adapters)
Technical data
Protection class
II; IP40
Input:
100-240V~, 50-60Hz, 1.0A
Output:
30VDC, 1.0A, 30W
The following international GlobTek plug adapters are included in the scope of delivery:
UL 2P - United States / Canada / Japan NEMA 1-15P configuration: protection class II; item no. R-NA-2(R)
UK 2P - United Kingdom BS 1363 configuration: protection class II; item no. R-UK-2(R)
EU 2P - European CEE 7/16 configuration: europlug, protection class II; item no. R-EU-2(R)
AUS 2P - Australia AS 3112 configuration: protection class II; item no. R-SAA-2(R)
Installation of an interchangeable adapter on the power supply
» If an insert is included, remove it by using a thumb or finger to push and hold the spring loaded
locking key downward (image 1).
» Hold the flap securely at the bottom and pull the adapter upward (image 2).
» Now press the adapter into the power supply in a downward movement (image 3).
The adapter locks in place and makes a clicking sound.
» Now check that the interchangeable adapter has been installed correctly: Hold the power supply in one
hand and pull up the adapter with the other hand (image 4). The adapter must be fitted securely in the
power supply and must not come loose.
image 1
image 2
image 3
image 4
Removing the interchangeable adapter from the power supply
» Using your thumbs or a different finger, push the flap downward (according to the arrow marking)
(image 5).
» Hold the flap securely at the bottom and pull the adapter upward (image 6)
image 5
image 6
lntended use
The product serves as the power supply for electrical devices. The power consumption by the devices that
are connected must not exceed the output current of the power supply. lt is imperative that the safety
instructions and all other information contained within these operating instructions are adhered to. This
product complies with statutory, national and European requirements. All of the company names and
product designations are trademarks of the respective owners. All rights reserved.
Scope of delivery
Power supply
4 power adapters
Operating lnstructions
Safety instructions:
The warranty/guarantee is voided in the event of damage caused by non-adherence to these operating
instructions. We do not accept any liability for consequential damages.
We do not accept any liability for property damage or personal injuries caused by improper handling or
non-adherence to the safety instructions. The warranty/guarantee is voided in such cases.
• For safety and approval reasons (CE) independently converting and/or modifying the product is not
permitted. Do not dismantle it!
• The product is not a toy. Devices that operate on the mains voltage do not belong in the hands of
children. For this reason, be particularly careful when in the presence of children. Operate the product
in such a way that it cannot be reached by children.
• The product is only suitable for operation in dry and enclosed indoor areas. The product must not get
damp or wet. Never handle it with wet hands. There is a danger to life due to electric shock.
• The power supply has been built according to protection class II and is supplied with international plug
adapters. Only suitable power sockets may be used as the voltage source for the plug-in power supply.
• Never use the product right after it has been moved from a cold to a warm room. The condensation
that arises from this can destroy the product under certain circumstances. There is also a danger to life
due to electric shock. First let the product reach room temperature before it is connected and used.
This can take several hours under certain circumstances.
• Avoid the following adverse ambient conditions at the point of installation and during transportation:
» Moisture or too high a humidity
Werbung
