WIKA GDM-100-TI-D Betriebsanleitung Seite 18

5. Commissioning, operation
5.7.2 Modbus tool
After wiring and installing the software of the interface converter or copying the
Modbus® tool software, the program can be started.
System requirements
Microsoft® Windows® 7 (32-bit) or Windows® XP (32-bit)
EN
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Factory setting
The COM port allocated at the PC has to be set for the access to the transmitter. Upon
delivery, the address is set to 247 and the baud rate is configured with 19,200.
With these settings, the transmitters can be read via the button "Read from instrument".
Factory settings:
Tag number: WIKA
■
Address: 247
■
Baud rate: 19,200
■
Parity: none
■
Scheduling: Off
■
Gas mixture SF6 [%]: 100 %
■
Gas mixture partner: N2
■
18 WIKA operating instructions gas density monitor, model GDM-100-TI-D