Operation - XANITALIA SCALDAPARAFFINA EXPORT Bedienungsanleitung

T
he appliance must be connected together with its fitted power
cable to a proper socket.
P
lace 3 kg of solid paraffin inside the tank, making sure that it is in
direct contact with the tank bottom, and cover with the lid (Fig. 1).
S
witch on the illuminated power switch (Fig. 2).
T
urn the thermostat knob to its maximum (Fig. 3) for 150 minutes
and then place it between the segments 1 and 4, according to the
temperature required (Fig. 4).
N
ever place hands or feet inside the tank if the thermostat
knob has not been placed beforehand in between the
segments 1 and 4. Furthermore, the red light (HIGH) must be
off.
CONTROL PANEL
_Electronic thermostat knob: to regulate the required temperature.
_Green light ( ON ): the warmer has been switched on.
_Red light ( HIGH ): the paraffin temperature is higher than that
required.
_Green light ( OK ): the paraffin temperature is the required
temperature.
_Yellow light ( LOW ): the paraffin temperature is lower than that
required.
T
o keep the paraffin temperature constant, always cover the tank
with its lid.
CAUTION:
Do not put more than 3 kg of paraffin into the warmer.
Do not heat the paraffin inside its original packaging.
Do not use the appliance when empty.
Only insert solid paraffin.
Do not pour water into the tank.

Operation

Fig.1
Fig.2
Fig.3
Fig.4
GB