Xindao P326202 Handbuch Seite 5

How to reconnect
Press the main button for 3s, the blue LED flashing, loosen your hand, the headset will
try to connect to the last device.
How to use Siri (IOS devices only)
When connected, press the main button for 2-3s.
How to charge the earphone and judge charge completed
1. Put the earphone into the charge box. The charging box has an integrated 480 mah
battery and is suitable for charging the earbuds multiple times (8)
2. When you see the earphone's red led is on, that means the earphone is charging.
3. When the earphone's red led is turn off, that means charge completed.
4. If item does not charge make sure to charge the charging box. This takes about 3
hours. Simple connect the micro USB cable to your computer USB and charge the box.
It is highly recommended to use only the USB of your computer to avoid damage to the
item. If using an external charger please make sure it's a certified one.
Attention
1. The paring time can be different per phone. Please be patient.
2. If no cellphone or other bluetooth device is connected to the earphone, it will auto
power off after 5 minutes.
3. Earphone charging time about 1.5~2 hours, while the charging box is about 3 hours
4. If you don't use the headset for a long time, please put it out of the charge box.
5. Wearing method.
Correctly wearing method.
4 5
P326202_True_Wireless_Single_Earbud_Manual.indd 523-9-2016 16:26:31