Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
flexpipe
EN
Pos.
Assembly examples
4
Concrete ceiling
Installation in concrete ceiling
- Align multi-distribution box, then fix to
mounting bracket (Fig.11)
- Connect and fix ventilation ducts
When installing in concrete ceiling,
additional sealing by means of cold-
shrink tape is recommended.
- if spigot connection is not required, insert
and fix spigot cap with seal
Suspended ceiling
Installation in a suspended ceiling.
The ducting is guided directly under the ceiling
with the 90° connection and it can be assem-
bled with the smallest possible ceiling suspen-
sions
- Align multi-distribution box, then fix to
mounting bracket (Fig.12)
- Connect and fix ventilation ducts
- if spigot connection is not required, insert
and fix spigot cap with seal
Assembly in prepared ceiling recess
Floor level duct installation in the insulation
layer on the raw concrete ceiling.
- Align multi-distribution box, then fix to
mounting bracket (Fig.13)
- Connect and fix ventilation ducts
- if spigot connection is not required, insert
and fix spigot cap with seal
Assembly upright, as floor distributor
Installation in wall construction or directly in the
floor construction. Floor level duct installation in
the insulation layer on the raw concrete ceiling
- Align multi-distribution box, then fix to
mounting bracket (Fig.14)
- Connect and fix ventilation ducts
- if spigot connection is not required, insert
and fix spigot cap with seal
Multi-distribution box FRS-MVK.. for supply and extract air distribution
plus
Fig.7
Fig.8
Fig.9
Â
Fig.10
.
Á
5
Fig.7:
Multi-distribution box
Installation in concrete cei-
ling with KT support
Insulation level
Footfall sound insulation
Screed
Fig.8:
Multi-distribution box
Concrete ceiling
Suspended ceiling
Fig.9:
Multi-distribution box
Concrete ceiling
Insulation level
Footfall sound insulation
Screed
Fig.10:
Multi-distribution box
Concrete ceiling
Insulation level
Footfall sound insulation
Screed
Werbung
