Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Insert the drain h ose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the ho se must be less than 1000mm.
NOTE
The top of the hose
must be less than
1000mm.
Connect the cold wate r supply hose to a threaded 3/4(inch) connector and make su re
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time , let the
wate r run to make sure that the water is clea r. This precaution is needed to avoid th e
risk of the water in let to be blocked and damage the a ppliance.
Please close the hydrant after using.
Front
Drain pipe
A
B
φ 40m m
19
Counter
Werbung
Inhaltsverzeichnis
