Correction Of Line Data After A Line-Cut - WFT Electra 550 PR-SHP Bedienungsanleitung

FISHING with the WFT Electra 550 PR-SHP

Correction of line data after a line-cut

First, wind the entire line back on the reel.
(Fig. 22) Press the 'SET' button for at least 3 seconds. A beep sounds, the display shows '0' first and then 'OK'
(see illustration).
(22)
!
Attention
* We recommend to execute a line data correction whenever 10 metres or more of line is cut or broken off.
* After completing a line data correction the positions 'Bait-at-Hand' and 'Water-Surface-Zero' need to be set and saved again;
otherwise the motor automatically stops with a remaining line length of 5 meters and the rest of the line must be retrieved
manually with the crank.
press `SET`knob for
more than 3 seconds
correction completed
37