Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT SECURITY NOTES
Download the configuration software and the manual from
RESI Informatik & Automation GmbH, Altenmarkt 29, A-8551 Wies, Austria, Tel: +43-316-262062-0, Fax: +43-316-262062-66, Email: help@RESI.cc URL: www.RESI.cc
Important hint:
•
Before you start with the installation and the initial setup of the device, you have to read this document and the attached installation guide and the actual manual for the device very carefully. You
have to follow all the herein given information very accurate!
•
Only authorized and qualified personnel are allowed to install and setup the device!
•
The connection of the device must be done in de-energized state!
•
Do not perform any electrical work while the device is connected to power!
•
Disable and secure the system against any automatic restart or power on procedure!
•
The device must be operated with the defined voltage level!
•
Supply voltage jitters must not exceed the technical specifications and tolerances given in the technical manuals for the product. If you do not obey this issue, the proper performance of the device cannot be
guaranteed. This can lead to fail functions of the device and in worst case to a complete breakdown of the device!
•
You have to obey the current EMC regulations for wiring!
•
All signal, control and supply voltage cables must be wired in a way, that no inductive or capacitive interference or any other severe electrical noise disturbance may interfere with the device. Wrong wiring can lead
to a malfunction of the device!
•
For signal or sensor cables you have to use shielded cables, to avoid damages through induction!
•
You have to obey and to apply the current safety regulations given by the ÖVE, VDE, the countries, their control authorities, the TÜV or the local energy supply company!
•
Obey country-specific laws and standards!
•
The device must be used for the intended purpose of the manufacturer!
•
No warranties or liabilities will be accepted for defects and damages resulting from improper or incorrect usage of the device!
•
Subsequent damages, which results from faults of this device, are excluded from warranty and liability!
•
Only the technical data, wiring diagrams and operation instructions, which are part to the product shipment are valid!
•
The information on our homepage, in our datasheets, in our manuals, in our catalogues or published by our partners can deviate from the product documentation and is not necessarily always actual, due to
constant improvement of our products for technical progress!
•
In case of modification of our devices made by the user, all warranty and liability claims are lost!
•
The installation has to fulfill the technical conditions and specifications (e.g. operating temperatures, power supply, ...) given in the devices documentation!
•
Operating our device close to equipment, which do not comply with EMC directives, can influence the functionality of our devi ce, leading to malfunction or in worst case to a breakdown of our device!
•
Our devices must not be used for monitoring applications, which solely serve the purpose of protecting persons against hazards or injury, or as an emergency stop switch for systems or machinery, or for any other
similar safety-relevant purposes!
•
Dimensions of the enclosures or enclosures accessories may show slight tolerances on the specifications provided in these instructions!
•
Modifications of this documentation is not allowed!
•
In case of a complaint, only complete devices returned in original packing will be accepted!
www.resi.cc
EN
Pay attention to the following rules:
1.
Disconnect the system from power
2.
Secure the system against automatic power on
3.
Check that the system is de-energized
4.
Cover other energized parts of the system
Werbung
