Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RESI-UI-2P2SW2L-WT
RESI Informatik & Automation GmbH, Altenmarkt 29, A-8551 Wies, Austria, Tel: +43-316-262062-0, Fax: +43-316-262062-66, Email: help@RESI.cc URL: www.RESI.cc
IMPORTANT: Before you start with the installation of the product, read the attached IMPORTANT SECURITY NOTES very carefully and follow all the herein given information very accurate!
CLAMPS
RESI-UI-2P2SW2L-WT
Power supply
Bridged group of clamps to supply other modules with the input supply
L+
L+: All pins marked L+ are internally combined (bridged) Supply 0..60Vdc
M-
M-: All pins marked M- are internally combined (bridged) Ground of the supply
GRUPPE A
Clamps for POTENTIOMETER A:
POTI
P+:Maximum terminal of potentiometer
P+
P-: Minimum terminal of potentiometer
PO
PO: Output terminal of potentiometer
10kOhm
P-
P+
PO
P-
GRUPPE A
Clamps for SWITCH A:
SWITCH
IN: Supply voltage for switch, both clamps are connected internally
IN
UP: If the switch is in position UP, the supply voltage on clamp IN will be
IN
outputted to this pin. In every other switch position this contact will be open
UP
DN: If the switch is in position DOWN, the supply voltage on clamp IN will be
DN
outputted to this pin. In every other switch position this contact will be open
IN
IN UP DN
GRUPPE A
Clamps for LED A:
LED
1: +24Vdc pin for LED (Anode)
1
2: GND pin for LED (Cathode)
A
K
2
1
2
GRUPPE B
Clamps for POTENTIOMETER B:
POTI
P+:Maximum terminal of potentiometer
P+
P-: Minimum terminal of potentiometer
PO
PO: Output terminal of potentiometer
10kOhm
P-
P+
PO
P-
GRUPPE B
Clamps for SWITCH B:
SWITCH
IN: Supply voltage for switch, both clamps are connected internally
IN
UP: If the switch is in position UP, the supply voltage on clamp IN will be
IN
outputted to this pin. In every other switch position this contact will be open
UP
DN: If the switch is in position DOWN, the supply voltage on clamp IN will be
DN
outputted to this pin. In every other switch position this contact will be open
IN
IN UP DN
GRUPPE B
Clamps for LED B:
LED
1: +24Vdc pin for LED (Anode)
1
2: GND pin for LED (Cathode)
A
K
2
1
2
EN
Werbung
