ZyXEL Communications G-220 v2 Schnellstartanleitung Seite 10

the grayed-out text field. You will need to enter this PIN in
the WPS screen of the AP.
2 Launch your AP's configuration utility, go to the screen
where you can configure the WPS settings and enter the
G-220 v2's PIN (an example screen from ZyXEL's
NWA570N is shown).
3 Click Start in the G-220 v2 Adapter screen and Apply or
Start in the AP's WPS screen within two minutes.
The AP authenticates the G-220 v2 and sends the proper
configuration settings to the G-220 v2. This may take up to
two minutes. The G-220 v2 is now able to communicate with
the AP securely.
Congratulations - you have finished!
ENGLISH
10