Maintenance Instructions; Technical And Functional Features - JBI APEM5-5 Bedienungsanleitung

14.

Maintenance instructions

After usage crimping tool must be cleaned and stored in a dry place. The power pack
and battery charger must be protected from humidity and foreign materials. Principally
the equipment does not require maintenance.
After the previously set processes are completed it is necessary to take the crimping tool
to the technical assistance service for inspection to guarantee perfect operation and
increase the lifetime of the machine. The customer is not authorised to perform mainte-
nance.
15.

Technical and Functional Features

•
The body of the pump and all components are made of high resistance materials
and tested.
•
The casing is entirely made of isolating, shock resistant polyamide, reinforced with
fibreglass.
•
The equipment has a light, compact and robust structure.
•
The range of the operating temperature is between –10°C and +40°C.
•
The maximum operating pressure of the pump and power pack is 50kN.
•
The safety valve of the system is adjusted to 55kN.
•
The system is equiped with an extreme rapid advancement due to a special double
piston technology, characterised by a low-pressure advancement and a slow high-
pressure advancement.
•
The progress of compression can be shown on the PC (pressure and operating time).
•
Control of the equipment is realised through a micro-controller.
•
Pressure control is performed by an electronic pressure sensor.
•
The charge of the power pack is constantly kept under control.
•
Management of technical assistance is performed with an electronic system.
•
The traceability of processes is ensured by automatic registration and saving in the
machine memory.
• The data saved can be read and the software can be updated by a mini USB inter-
face.
• Additional LED indicators provide rapid information on the status of the machine.
• The first service assistance should be performed after 20,000 cycles, but can be freely
programmed according to the conditions of use.
26 APEM5-5