RCBS CHARGEMASTER LITE Produktanweisungen Seite 8

Scale
Indicators
GO
SCALE INDICATORS DESCRIPTION
Stable: indicates the weight is stable
Over: indicates the powder weight in the pan is higher than the set value
Under: indicates the powder weight in the pan is lower than the set value
Auto: indicates in Automatic Dispense Mode
Manual: indicates in Manual Dispense Mode
FUNCTION KEY DESCRIPTION
: Key is to power the scale on and off. When you turn the scale on the display will first
show 99999 and will go through a quick count down and will then display to 0.0 GN (grain
mode). "Stable" indicates when ready to use. When the scale is not in use the scale should
be turned off and unplugged.
GO: Press key to dispense the powder once you have entered a given charge.
CAL: Key is used to calibrate the scale. You should calibrate your scale each time you begin
a new reloading session. See the calibration section for full details. (Note: it is important
to make certain the scale display is properly set to the weight unit (either grains or grams)
that you are using.
ZERO: Key is used to re-zero the scale. For example, to weigh powder in a powder pan, you
would first place an empty pan on the scale platen and press [ZERO] key to re-zero the
scale. This will automatically subtract the weight of the pan from the scale.
MODE: Key switches between Auto to Manual Dispensing mode. The default is Auto.
UNITS: Key switches scale from GN (grains) to GM (grams). The default is GN.
TRICKLE : Hold it to manually to dispense the powder.
CANCEL: Clear the data or stop the operation.
8
Function
Keys
Power