Cleaning And Maintenance - Kebo FLS120M Benutzerhandbuch

5.CLEANING AND MAINTENANCE

WARNING: Ensure that the fan is switched off from the supply mains
before removing the air filter screen.
1. Clean the air filter screen (mp 1)
Cut off the power supply, unscrew the screw on the top edge of the air
filter screen, pull the handle of air filter screen, remove it from the
appliance. Clean the air fliter screen with neutral detergent and banister
brush, then clean it with clear water. Finally, place back in reverse order.
Do not forget to fasten the
2. Clean the wetted pad (mp2, mp3)
Cut off the power supply, unscrew the screw on the top edge of air filter
screen, take down the air filter screen, unlock the wetted pad and its
support, and take out, then draw the wetted pad from the support. Clean
the wetted pad with neutral detergent and banister brush, then clean it
with clear water. Finally, place back in reverse order. Donot forget to lock
the support with the wetted pad and to fasten the screw on the top edge
of the air filter screen.
Attention: the wetted pad must be installed horizontally, in order to aviod
leaking.
3. Clean the shell
Clean with neutral detergent and soft cloth.
Attention: cut off the power supply when cleaning the appliance, as there
is a high pressure in the body. Do not leave any water on the surface of
control panel.
screw.