Herunterladen Diese Seite drucken

Ideeo HT 0961 Gebrauchsanweisung Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
To prevent damage to the power cord,
do not bend or kink the cable, especially where it leaves the housing,
do not pull on the cord,
do not coil the power cord around the appliance.
Do not leave the appliance unattended while in use.
Always switch off and remove the plug from the wall socket after use,
as well as
in cases of malfunction, and
during cleaning.
When removing the plug from the wall socket, never pull on the power cord;
always grip the plug itself.
Do not place the appliance on any surfaces sensitive to heat during or
immediately after use.
This appliance is not intended for use by any person (including children)
with reduced physical, sensory or mental capabilities, or lacking experience
and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Caution:
Keep any packaging materials well away from children, as they are
a potential source of danger e.g. from suff ocation.
No responsibility will be accepted if damage results from improper use, or if
these instructions are not complied with.
This appliance is intended for domestic use only and not for commercial
applications.
In order to comply with safety regulations and to avoid hazards, repairs of
electrical appliances must be carried out by qualifi ed personnel, including
the replacement of the power cord. If repairs are needed, please send the
appliance to one of our customer service departments. The addresses can be
found in the appendix to this manual.
Styling nozzle
The styling nozzle can be fi tted to the air outlet to facilitate shaping the hair
during blow drying.
2-position switch
The hair dryer has a 2 position switch:
Functions:
0 = off
1 = warm air / gentle air-fl ow (for styling)
6

Werbung

loading

Verwandte Produkte für Ideeo HT 0961