Basic Parameters - Velleman DRT1 Bedienungsanleitung

8.5 Selecting and Setting the Party/Holiday/Travel Modes
The thermostat offers the possibility to programme preset modes. To do so:
Press PROG and select one of the modes with the dial.
Press BOOST/OK to confirm. Select the hours/day with the dial. Press
BOOST/OK to confirm. Next, select the temperature with the dial. Press
BOOST/OK to confirm.
8.6 Selecting the Manual/Eco/Pos/Boost Modes
In normal display mode, press FUN to enter the desired mode:
Manual mode: Manual override of the auto mode. Rotate the dial to
o
the desired temperature.
Eco mode: In eco mode, the room temperature will be 3 °C lower
o
than the temperature in auto mode.
Position mode: Opening position of the valve from 0 to 100 %.
o
Rotate the dial to the set the opening percentage.
In normal display mode, press BOOST/OK to enter the boost mode. In boost
mode, the valve is completely opened for 300 seconds. The thermostat will
return to the previous status.

8.7 Basic Parameters

V. 01 – 22/06/2016
party mode
travel mode
manual mode
eco mode
open-window
mode
temperature
setting
DRT1
10
holiday mode
position mode
boost mode
valve stroke
setting
room
temperature
display
©Velleman nv