axing basic-line SPU 84-01 Betriebsanleitung Seite 4

Field of application:
The devices are suited only for distributing radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
Product description:
The SPU 84-01 is used for connection of four receivers to two Quattro LNBs.
Weather protection housing:
The multiswitches are delivered in a weather protection housing. Therefore
they can be easily and reliable mounted at the aerial mast outside.
RF-Installation:
 Connect the SAT inputs of the multiswitch to the LNBs of your SAT
reception antennas..
 Connect the outputs of the multiswitch to the antenna sockets. Use highly
shielded coaxial cables with F connectors. Suitable cables and connectors
can be found in the current AXING catalogue or under www.axing.com.
Power supply:
The multiswitch and the LNBs are supplied by the SAT receiver.
Note: The maximum transient current to supply the LNBs must not exceed
500 mA.
 Please check whether the receiver is suitable to supply the multiswitch and
the LNB with power.
Easy to mount with cable ties