Operating - Kebo COOLBOY TREND RC Benutzerhandbuch

2. OPERATING

1. Turning On / Off Fan
Once the fan is plug one can press the (ON / OFF – I / 0) switch to turn the
appliance on or off.
2. Set the air speed
With the SPEED button, the speed of the air shall be set at 3 different speeds
(low, medium, high). This can also be via the same function button on the remote
control.
3. Setting oscillation
By pressing the button SWING the fan will start to oscillate/swing. The fan pivots
/ rotates in 180 degrees from left to right and back again. Thus the air is moved
wider. By pressing the SWING button again the fan stops with rotating. This can
also be via the same function button on the remote control.
4. Setting the timer
The TIMER function can be set from 1 hour to 7 hours using the TIMER button
using the same function button on the remote control.
The light at 1h, 2h, 4h, or a combination of these will light up to show the total set
time. When the set time has elapsed, the fan will turn off automatically (standby).