Operation - Eurotops STRONG BOX Gebrauchsanweisung

T4290 / CH0429
• Press the * key to confirm.
• Enter the month using the keys 0-9.
• Press the * key to confirm.
• Enter the current date using the keys 0-9.
• Press the # key to confirm.
b) Setting the alarm time
• To change the alarm time directly, press the key combination * and * and # and #.
• Enter the hours for the alarm time using the keys 0-9.
• Press the * key to confirm.
• Enter the minutes for the alarm time using the keys 0-9.
• Press the # key to confirm.
You can turn off the sound of the alarm by pressing any key.
c) Activate / desactivate alarm
Press the keys * * 2. Use the key # the alarm function can then be activated or disactivated (only
dashes appear in the diplay when the alarm us descativated.
d) Changing the total amount
To change the displayed total savings manually (e.g. for withdrawal):
• Press * * # # #
• Press the * key repeatedly, until you reach the number to be changed and it flashes.
• Enter the desired digits using the keys 0-9.
• Confirm every input with the * key.
Finally, confirm the change by pressing the # key.
After about 10 seconds without any further input, the display automatically switches back to
time mode.
Each key press is confirmed by a beep.
3. Displaying information
In the normal mode, the current time is always shown on the display.
a) See the date
• To see the date, press the keys * * 0 successively. After about 10 seconds, the display chan-
ges back to the time mode.
See the total amount in €
b)
• To see the mout of coin, press the keys * * 1 successively. After about 10 seconds, the display
changes back to the time mode.
c) See the alarm time
• To display the alarm time, press the keys * * 2.
If no key is pressed for about 10 seconds, the display changes back to the time mode.
4. Setting the digital code
The default code is 000000.
To set your own code, please proceed as follows:
• Press the * key and enter the old code (in this case 000000).
• Confirm your input with the # key.
• Enter a new 3 to 6 digit code using the keys 0-9.
• Confirm your input with the # key.
• Enter the new 3 to 6 digit code again.
• Confirm your input with the # key.
Now, the new code is stored.
5. Opening the "Strong box" door
• Enter the default code or your entered code using the keys 0-9.
• Confirm your input with the # key.
• You hear a long beep and you hear a click.
• Gently turn the "Strong box" wheel to the right, and open the door.
• A double beep is sounded.
• If you do not open the door after about 3 seconds, it locks automatically and you must enter
the code again.
6. Reset all settings
On the inside of the door there is a "RESET" key.
Using this "RESET" key, all the settings including the code are set to the original default state.
The code returns to the factory default 000000.
The keys are light up red on use.

7. Operation

1. Throw only one coin in at a time through the opening in the cover.
2. The LCD displays the value of the coin and the cumulative total value for your coins.
General safety instructions
• If you have any doubts about the correct operation, or the safety of the device,
please consult a specialist.
• The product is not a toy and must be kept out of the reach of children.
• Do not leave packing materials unattended. They may become dangerous
playthings for children.
• If you sell this product or give it away, you must hand over these operating instruc-
tions.