Trust 17238 Gebrauchsanleitung Seite 7

UPS - USER'S MANUAL
Information
UPS
A RS232 Connection
USB Connection
B
C UTP input/ output
Circuit breaker
D
E Power Input
Power Output
F
Display
G Input Voltage (Unit: VDC/Hz/VAC)
UPS Mode (Line Mode/ AVR/ Battery
H
Mode)
Output Voltage (Unit: %/Hz/VAC)
I
J Battery status (Load & Battery level)
Installation
- Turn off the PC.
1
- Remove plug from the mains power socket.
- Connect the PC and monitor to the UPS. (With the cables included in the box)
- Connect the UPS to the mains power socket. Use the original power cable of the pc.
2
- Connect the UPS to the pc, using the USB or serial cable.
- Turn the UPS on. (UPS will beep for confirmation)
- Turn the PC on.
(The UPS needs to charge for 14hours)
- Insert the CD in the PC.
3
- Run Setup.exe
- If windows shows the User Account Control warning, press 'Yes'
- Install 'Winpower' software
4
- Serial number is: 511C1-01220-0100-478DF2A
- Choose the preferred installation directory.
5
6 - Read the Winpower manual.
Display Indication
Load level Load bar
Indication
0% ~ 25%
25% ~ 50%
50% ~ 75%
75% ~ 100%
Battery level Load bar
Indication
0% ~ 12.5%
12.5% ~ 37.5%
37.5% ~ 62.5%
62.5% ~ 87.5%
87.5% ~ 100%
2