Abus ITAC10130 Bedienungsanleitung Seite 6

Reset
OOB
Console
Grounding AC100~240V
Power Input
Access to Web Management via Downlink Port
To connect to the web management interface, connect a network cable to any of 1-
16/1-24 Downlink port and enter the following data into browser.
The default factory settings are:
IP-Address:
User:
Password:
Access to Web Management via CLS Port
To connect to the web management interface, connect a console cable (RJ45 ->
R232 serial port 115200,8, N, 1) to the CLS port, to the PC at the serial port (DB9)
and enter the following data into the browser.
The default factory settings are:
IP-Address:
User:
Password:
Downlink Gigabit PoE Ports
192.168.1.200
admin
admin
192.168.1.200
admin
admin
Uplink Gigabit SFP Ports
Status Power
LED LED