Low Battery - JVD T29 Gebrauchsanweisung

Deactivate Alert function for Outdoor Temperature
Hold "ALERT" button for 3 seconds to enter Outdoor Upper Temperature Alert setting.

Icon " " beside Temperature's digits flash. Press "▲" or "▼" button to adjust
setting for alert value, Press "ALERT" button (B5) to confirm the setting, and move to
the lower limit temperature alert setting. Press "▲" (B2) or "▼" (B4) button to
adjust the alert value, press "ALERT" button to confirm and quit the setting.
When it's alert, the corresponding icon "

any buttons to stop the alert sound, otherwise, it will sound for 2 minutes, and stop
automatically.
Note: The Setting Mode will automatically exit in 15 seconds without any adjustment.
6.5 Frost Alert
is shown if the outdoor temperature is between -2°C ~ +3 °C
"

7. Low battery

The low battery icon "
status. The batteries should be replaced.
8. Precautions
Use a pin to press the reset button (B3) if the unit does not work properly.

Avoid placing the clock near interference sources/metal frames such as computer or

TV sets.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas

The outdoor sensor must not be set up and installed under water. Set it up in away

direct sunlight and Rain
Never clean the device using abrasive or corrosive materials or products. Abrasive

cleaning agents may scratch plastic parts and corrode electronic circuits
" or "
"will appear l indicating that thermo sensor is in low battery
" would flash on the LCD. Press
27