Technical Specification; Installation - Ravcore ROCK 750 Installationsanleitung

EN
INTRODUCTION
Dear User, thank you for buying the professional high-end
gaming power supply: Ravcore ROCK 750W.
Please read the manual carefully before using this PSU.
ROCK was made with particular care about every detail, to fulfill
all requirements of even the most demanding Users.
Ravcore ROCK provides you satisfaction by perfect specification
and features, modern technical solutions and excellent reliability
ratings.
BOX CONTETNTS
1. PSU x 1
2. USER MANUAL x 1
3. CABLE BAG x 1
4. POWER CORD x 1
5. MOUNTING SCREWS x 1
Please make sure that all contents are in the box.

INSTALLATION

1. Unplug power plug from the computer.
2. Take the side panel off.
3. Disconnect all power connectors of the current power supply.
4. Unscrew mounting screws of the back of the computer which
fix the power supply to the computer case.
5. Screw on the new power supply to the computer case.
6. Connect the connectors of the new power supply to ap-
propriate devices inside the computer. (Please find table of
cable and connectors description at the end of this manual)
7. Make sure that all of the bolts have been properly screwed
inside the computer. Short circuit may be caused by a falling
screw.
8. Put on the side panel and mount the computer case.
9. Plug in the power cord.

TECHNICAL SPECIFICATION

INPUT
VOLTAGE
MINIMUM NOMINAL
180 230
FREQUENCY
47Hz ~ 63Hz
CURRENT
230Vac/5.5A max.
INRUSH CURRENT
Power no damage at AC input 230Vac and 250C cold start.
POWER EFFICIENCY
Meet 80 Plus GOLD requirement at 230Vac input.
Loading Table for Efficiency Measurements
Loading +12V +5V +3.3V
20% 10.81A 2.1A 2.1A
50% 27.03A 5.25A 5.25A 0.13A 1.09A
100% 54.06A 10.51A 10.51A 0.26A 2.18A
LEAKAGE CURRENT
3.5mA max.
POWER FACTOR
PF > 0.9 at Full Load
ErP REQUIREMENT
Pd< 0.5W
UNITS
Vrms
Required
-12V +5Vsb minimum
efficiency
0.05A 0.44A 87%
90%
87%
6