Operation; Holiday Mode - Konig KFK 45411 A2 NF Gebrauchsanweisung

English
Installation
Place the unit on a level and stable
Fig.
1
surface. Keep the minimum distances
to all sides.
Unevenness can be compensated with
Fig.
2
the adjustable front feet.
The refrigerator is equipped with three
Fig.
3
glass shelves, which, if desired can be
removed by pulling them forward. The
lower glass shelf can be used in two
different heights.

Operation

Plug in the power plug into an
Fig.
4
appropriate mains socket outlet.
Note:
Allow the product to precool for about 2-3
hours before putting in the food.
Freezer mode
Press the Freezer button to set the
Fig.
5
freezer temperature from -16 to -24 ° C
in 2 ° C temperature steps.
Pressing the Freezer button for at
Fig.
6
least 3 seconds activates the quick
freeze function (super) and the
indicator
to freeze more quickly. The function
is automatically switched off after
26 hours or can also be switched
off manually by pressing the button
Freezer. The freezer then returns to
the previous setting.
Fridge mode
Press the Fridge button to set the
Fig.
7
temperature of the refrigerator from 2,
3, 4, 6 to 8 ° C.
16
KFK45411-A2-NF_170728_V05_HR.indb 16
lights up. This causes food

Holiday mode

Pressing the Fridge button for at
Fig.
8
least 3 seconds activates the holiday
function and the indicator
This increases the cooling temperature
to 15 ° C to minimize energy
consumption.
Caution
• Do not store any food in refrigerator if this
function is activated.
• The function can be switched off
by pressing the Fridge button. The
refrigerator then returns to the previous
setting.
Adjust the sides of the doors
Note:
• If necessary, and if the premises require
it, the mounting of the doors can be
changed. To do this, follow all the following
instructions in the given order.
• The following tools are required:
Socket wrench 8 mm, wrench 8 mm, phillips
screwdriver, slotted screwdriver. Due to
the uniqueness of the appropriate tools,
those are not mentioned separately in the
following instructions.
• For this work a different stop holder and
cover are needed, which are provided with
the unit.
• For safety, remove the three door trays to
prevent them from being damaged.
lights up.
28/7/17 4:33 pm