Viii.precautions - Rapid RM04N Installations- Und Anwenderhandbuch

VIII. Precautions
１. Attention
A. Set proper temperature in order to get comfortable water temperature; to
avoid overheating or overcooling;
B. Please don't stack substances that can block air flow near inlet or outlet
area, or the efficiency of the heater will be reduced or even stopped;
C. Please don't put hands into outlet of the swimming pool heater, and don't
remove the screen of the fan at any time;
D. If there are abnormal conditions such as noise, smell, smoke and electrical
leakage, please switch off the machine immediately and contact the local
dealer. Don't try to repair it yourself;
E. Don't use or stock combustible gas or liquid such as thinners, paint and
fuel to avoid fire;
F. In order to optimize the heating effect, please install heat preservation
insulation on pipes between swimming pool and the heater. During
running period of the swimming pool heater, please use a recommended
cover on the swimming pool;
G. Connecting pipes of the swimming pool and the heater should be ≤10m,
or the heating effect of the heater cannot be ensured;
H. This series of machines can achieve high efficiency under air temperature
of +15℃～+25℃.
２. Safety
A．Please keep the main power supply switch far away from the children;
B． When a power cut happens during running, and later the power is restored,
the heater will start up automatically. So please switch off the power
supply when there is a power cut, and reset temp when power is
restored;
10