Troubleshooting - Navibe Back Track Bedienungsanleitung

3

Troubleshooting

Problem
No power
Satellite not
detected
Possible Causes
1. Battery low or damaged.
2. Power button not held
down for 1 seconds.
1. Not enough time to scan
for satellite signal.
2. Device under cover.
Solution
1. Change battery.
2. Hold down power button until device powers up.
1. Check satellite icon to see if it is continuing to
blink. If it stops blinking, it has acquired fix on
satellites.
2. Keep the device in an open area, not blocked
by buildings.