Setup Access Code; Set Clock; Call Output Mode; Stand-By Time - Bpt IPD/300LR Bedienungsanleitung

Setup access code

Sets code required to access
setup menu (fig. 11).
The default code is 12345. Up to
9 numbers and letters can be
entered.

Set clock

If a clock is present in the
system, it is possible to set the
clock parameters directly from
the switchboard (days of the
week, hours and minutes) (fig.
12).

Call output mode

Enables you to select the call
status output mode available for
additional bells (fig. 13).
Default setting: call status output
is enabled for any incoming call.
The output can be set so that it is
activated only when alarm calls
are received, or only when calls
are received from the entry
panel, by selecting the relevant
mode with keys and
Confirm with the key .

Stand-by time

Sets how long the switchboard
may remain idle before screen
goes blank (fig. 14).
Default time is 5 min. This setting
can be edited by entering a time
in the range 1 to 54 min.
The relevant status is indicated
by the stand-by LED flashing. To
switch the screen back on, sim-
ply press any key.
22
SETUP MENU
Lingua/Language
Ring volume
Users management
Calls filter
Call divert
Entry panels selection
Setup access code
Set clock
Call output mode
.
SETUP MENU
Lingua/Language
Ring volume
Users management
Calls filter
Call divert
Entry panels selection
Setup access code
Set clock
--------------------------------------
Call output mode
Setup access code:
12345
A-Z DIR
--------------------------------------
Day of week:
(1-7)
1
SETUP MENU
Lingua/Language
Ring volume
Users management
Calls filter
Call divert
Entry panels selection
Setup access code
Set clock
Call output mode
All calls
Alarm calls only
Ext. panel calls only
SETUP MENU
Ring volume
Users management
Calls filter
Call divert
Entry panels selection
Setup access code
Set clock
Call output mode
Stand-by time
--------------------------------------
Stand-by time:
(1-54)
5
A-Z DIR
A-Z DIR
--------------------------------------
Set clock:
hour (0-23) min (0-59)
1 : 00
CALL OUTPUT MODE
A-Z DIR
min
11
12
13
14