Navitel MSR500 Benutzerhandbuch Seite 23

23 | USER MANUAL
Stamp
Parking monitor
EN
Battery
Screen saver
This function adds date stamp or device logo to the record. Click "OK" to select type of stamp or to
switch the function off.
When the device in the standby mode will detect the vibration, it will automatically start recording. If for
one minute vibration will not happen again, the device goes into standby mode.
Motion detection function is available in the Parking mode (disabled by default). In the Video recording
mode, select "Motion event REC". When an object is moving the device will automatically start recording.
If the object does not move for more than 10 seconds, recording stops.
Red indicator lights up when the device is plugged into an external power supply; as the battery is
charging, the red light will gradually dim; the red light going out means the battery is full.
The device can automatically shut off the screen to reduce power consumption; time interval can be
set in the Screen Saver menu.