Device Functions - Navitel MSR500 Benutzerhandbuch

Device functions

Video Connect the device to an external power supply and it will start recording automatically (indicated by
the flashing blue light). Press the OK button to stop recording (the blue light will become steady). Press
OK again to record another video. Each video will be saved automatically.
In Video Recording mode, press the Menu button to enter Capture mode, press the OK button to take a
Photo
photo (it will be saved automatically).
In Video Recording mode, press the Menu button twice to enter Playback mode; press the Up and
Playback
Down buttons to select a file; press the OK button to play a file. During playback, press OK to pause/un
pause; press the Up and Down keys to fast forward/rewind.
In Video Recording mode, press Power to protect the current recording. A key symbol will appear at the
Lock file
bottom of the screen. In Playback mode, select a file, press Menu and select Protect, then Lock Current
or Lock All. Protected files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove
protection.
Record audio Record video with or without sound.
Loop recording This setting allows saving the recording in separate files every few minutes. For example, if set to 5
minutes, 1 hour of footage will be saved as 12 five-minute fragments. If the memory card is full, all
unprotected files will be overwritten in the order they were created.
G-sensor If the vehicle is hit by something, the DVR will automatically lock the current video.
Night light Turn on when it's dark to improve image brightness.
NAVITEL MSR500 | 22
EN