Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
C.
Replace the battery cover on the mouse.
D.
Plug the USB receiver of the mouse in a free USB port of your
computer.
The computer will automatically detect and install the Mouse. No drivers
are needed.
E.
Press the "connect" button on the receiver. The LED of the receiver
will flash slowly.
F.
Press the "connect" button on the bottom of the mouse. The LED on
the receiver will flash quickly.
The mouse is now operational.
Note:
The CLLMTRAVWL mouse has a power-save function. When not used for
a certain time the mouse will de-activate itself. Pressing the left
mouse-button two times will re-activate the mouse again.
Note:
If your mouse is not working properly, the batteries can be empty.
Replace the batteries with the steps described in chapter 1.
2. Customizing the mouse settings
You can customize several mouse settings on your computer. These
settings allow you to change the pointer speed, doubleclick speed, etc.
Click "Start", "Run", execute the
command "MAIN.CPL" and click "OK".
The Mouse Properties will be shown on
your display.
6
Werbung
