Changing User Options - Buffalo CF764 Bedienungsanleitung

Telephone Helpline: 0845 146 2887

Changing User Options

User options can be changed to suit individual preferences
1.
2.
3.
4.
Stage Cook Change Beep
Open the door
• Display turns off
Press and hold STOP pad for a while.
• When the oven enters Option Code mode, it will show "CODE__" in the display.
Press two number pads in order for a two digit option code. For example, if you want to choose "CODE 1-0" from the cook
ending signal list, press number 1 pad and number 0 pad in order.
Press START pad to save changes
• To change additional option codes, repeat steps 3 and 4
Pads Display
CODE 1-0
Cook Ending Signal CODE 1-1
CODE 1-2
CODE 1-3
CODE 1-4
CODE 2-0
Key Pad Beep On/Off CODE 2-1
CODE 3-0
CODE 3-1
On/Off
CODE 4-0
Maximum Cooking Time CODE 4-1
Preprogrammed Cook CODE 5-0
CODE 5-1
CODE 6-0
Display OFF Time CODE 6-1
Counter CODE 6-2
CODE 6-3
CODE 7-0
Repeat Feature CODE 7-1
CODE 8-0
COOK END message CODE 8-1
Reminder
CODE 9-0
Manual Time Cook Lock CODE 9-1
CODE 0-0
Clean Filter Reminder CODE 0-1
CODE 0-2
CODE 0-3
CODE 0-4
User Options (Factory Settings in Bold)
3 long beeps for 3 seconds
1 short, 1 long beeps for 3 seconds
3 seond beep
3 quick beeps for 3 seconds
5 quick beeps for 3 seconds
A key pad will beep when it is pressed.
No beep when a key pad is pressed.
The oven will beep when stage cook changes to the next stage.
The beep when stage cook changes to the next stage.
Maxiumum Cooking Time is 60 minutes.
Maxiumum Cooking Time is 10 minutes.
10 preprogrammed cooks for key pads (0-9)
200 preprogrammed cooks for key pads (0-199)
Display will turn off if a key isn't entered in 1 minute.
Display will turn off if a key isn't entered in 2 minutes.
Display will turn off if a key isn't entered in 3 minutes.
Display will turn off is a key isn''t entered in 4 minutes.
Repeat feature is not allowed.
Repeat feature is allowed.
No END message after finishing a cooking.
END message will be left on the display during display-on time.
A user may use preprogrammed pads and manual time clock.
A user use preprogrammed pads only.
Clean Filter message will show up for 24 hours every 90 days.
Clean Filter message will show up for 24 hours every 60 days
Clean Filter message will show up for 24 hours every 30 days
Clean Filter message will show up for 24 hours every 10 days
The oven will not display clean filter message.
UK
8