Tripods; Other Accessories; Warranty - Agatec GAT 220 Bedienungsanleitung

• Specifications
Range*
Accuracy*
Battery life
Environmental
Size
* Varies with laser used. Actual accuracy depends on beam diameter
and distance to the laser.

6.2 Tripods

The laser can be mounted on a 5/8-11 flat head tripod. You can also
use a tripod with an elevating column to adjust the height of the laser.

6.3 Other accessories

• Laser-enhancing glasses improve the visibility of the laser beam
in bright light conditions.
• Red magnetic target improves the visibility of the laser beam in
bright conditions. Quickly attaches to any metallic surface.
• RCR500 detector/remote control functions as a detector, similar
to the SR200, plus can be used to calibrate the laser.
Cannot be used as a remote control with the GAT220,
except for calibration.
• TL25 remote control: facilitates calibration; cannot be used as a
remote, except for calibration.
7. Limited Warranty
EXPRESS WARRANTY FOR HARDWARE
The manufacturer warrants to the original end user ("Customer")
that this Product will be free from defects in workmanship and
materials, under normal use, for two (2) years (one year in
North America), unless such warranty period has been extend-
ed by the manufacturer, and provided any and all operating
16
500 ft. (150 m)
Fine: ± <1/16" (1 mm)
Standard: ± 1/8" (2.5 mm)
50 hours; 9V alkaline
Waterproof (IP66+)
6" x 3.25" x 1.5"; .35 lbs.
(15 x 8 x 3.5 cm .2 kg)
and maintenance instructions are strictly respected, in particular
in case of extreme and/or continuous applications/use of the
Product. The warranty period begins on the proved purchase
date, or if applicable, date of delivery or date of acceptance
report. The manufacturer's sole obligation under this express
warranty shall be, at the manufacturer' sole option and
expense, to replace or repair the Product or part, or refund the
purchase price paid for the Product. The manufacturer warrants
any repaired or replaced Product or part for a period of ninety
(90) days from shipment, or through the end of the original war-
ranty, whichever is longer. All Products or parts that are
replaced become the property of the manufacturer. This express
warranty does neither cover consumables, such as batteries,
bulbs and fuses, nor third party products.
OBTAINING WARRANTY SERVICE
Customer must contact an authorized service center of the man-
ufacturer within the applicable warranty period to obtain war-
ranty service authorization. Dated proof of original purchase
from the manufacturer's authorized distributor and a description
of the defect will be required. The manufacturer is not responsi-
ble for Products or parts received without a warranty service
authorization. Repaired or replacement Products will be shipped
to Customer at the manufacturer's expense. The repaired prod-
uct or part will be shipped as soon as reasonably possible. The
manufacturer shall not be responsible for any damages occur-
ring during such shipment. For Products forming part of a fixed
installation, such place of performance shall be the site of such
installation and the manufacturer shall have the right to charge
for additional costs for such services under warranty if the site
of the Product is other than where the Product was originally
shipped or installed.
WARRANTY EXCLUSIVE
Customer's sole remedy for breach of the warranty shall be the
express warranty. The foregoing warranty is exclusive and is in
lieu of all other warranties, terms, or conditions, express or
implied, either in fact or by operation of law, statutory or other-
wise, including warranties, terms or conditions of merchantabili-
ty, fitness for a particular purpose, satisfactory quality and non-
infringement, all of which are expressly disclaimed. The manu-
facturer shall not be liable if the alleged defect or malfunction
was caused by Customer's or any other person's misuse, neg-
17