System Requirements; Installation Instructions - USRobotics 5454 Installationsanleitung

English
Back
Item
LAN
Reset
15VDC
SecureEasySetup

System Requirements

! A computer with an Ethernet adapter installed
! A router or other networking device with a DHCP server
! An HTML 4.01-compliant Web browser with JavaScript enabled

Installation Instructions

Step One: Connect the Access Point
1. Look at the label on the bottom of the access point and note its LAN MAC
address. You may need it to distinguish the access point from other devices
on your network.
LAN MAC Address: _________________________
2. Connect the provided antennas to the back of the access point.
2
LAN
Function
Connects an antenna to the access point.
Connects the access point to a networking device.
Reboots your access point or restores your access
point to its factory default settings.
• To reboot your access point without changing
your current settings, press and hold the Reset
button for 1 second.
• To restore your access point to the factory default
settings, press and hold the Reset button for at
least 5 seconds.
Connects the power adapter to your access point.
Enables SecureEasySetup on your access point.
• To enable SecureEasySetup on your access point,
press and hold the SecureEasySetup button for 1
second.
• To reset your wireless security settings to the fac-
tory default (no security enabled), press and hold
the SecureEasySetup button for 7 seconds.
15VDC
Secure
Easy
Reset
Setup