Setup; Language; Auto Answer; Search For Device - Alpine Kca-200Bt Bedienungsanleitung

Setup

1
Hold for about two seconds to get to the sub
menu of SETTINGS.
2
Press or to move through the menu
options backward and forward.
3
To confirm a selection or to go forward one level,
hold , to go backward one level, hold
about two seconds.

Language

The available menu languages are listed.
(ENGLISH/FRENCH/GERMAN/ITALIAN/
SPANISH).
1
To move through the list, press
2
Confirm a selection by holding
seconds. The menu language will change
accordingly.

Auto Answer

KCA-200BT enables answering an incoming call
automatically after the second ring.
1
If deactivated, the display will show the message
"YES". To enable, hold
seconds.
2
If activated, the display will show the message
"NO". To disable, hold
seconds.
1 EN KCA-200BT.pmd

Search for Device

KCA-200BT detects Bluetooth mobile phones in
surrounding. For compatible mobile phones,
please see the product information on our web
site.
for
1
2
or .
3
for about two
4
for about two
for about two
7
The display will show the message "SEARCH".
Hold for about two seconds to start the
searching process. "SEARCHING" will be shown
in display. Once finished, the names or codes of
the detected mobile phones are listed. "NOT
AVAILABLE" will be shown in display, if no
devices have been found.
To move through the list, press
To connect KCA-200BT with any of the phones
on the list, hold for about two seconds while
the name or code of the mobile phone is shown
in display.
Once a device is connected, the display will
show "DEVICE CONNECTED" and the
SEARCHING process cannot be operated
anymore.
NOTE: This is the description of the
connecting process performed by KCA-200BT.
To perform the Bluetooth connection and to
activate Bluetooth of the mobile phone, the
instruction manual of the mobile phone has to
be checked additionally.
7/11/2006, 2:26 PM
or .
7
-EN