Advice For Installation; Technical Characteristics - CGV MODUline Universel Bedienungsanleitung

If the image obtained appears correctly, to renew the operation on your secondary television sets
remainders and safeguard the adjustments. Your installation is finished.
If the image obtained is of bad quality, it is that the channel that you chose is already occupied by
another program. Choose a new frequency on MODUline Universal, and start again it adjustment of
your television sets and video tape recorders.

5 - ADVICE FOR INSTALLATION

Image of the program emitted by MODUline Universal disturbed:
If the image of the programme transmitted by the universal MODUline is disturbed by another channel ,
then choose another channel of emission on the universal MODUline (see paragraph 4.1).
No the image on the program emitted by MODUline Universal:
If after having adjusted your television sets you do not receive images coming from MODUline
Universal.
Universal, check connection between your video apparatus (satellite, video tape recorder, etc...) and
MODUline Universal, according to the principle of connection (see paragraph 2).
If the image of the program emitted by MODUline Universal is snow-covered:
The outgoing signal of MODUline Universal east can be insufficient because of the significant number of
your television sets, in which case your installation requires an amplifier. To consult your fitter in this
case.
Not to expose to the risks of water projection.
6 - POSSIBLE OPTION
To be able to operate by remote control your video apparatus (satellite, video tape recorder, etc...) since
a secondary part of your house: ZAPline.
ZAPline is a product without wire which functions with your own remote controls.

7 - TECHNICAL CHARACTERISTICS

Modulator
•
Modulator with synthesis of frequency: Stereo
BG, I, D, K, K', M or N
•
Channel of modulation: BIII, Interband,
Hyperband and UHF (from 120,25 to 859,25 MHz
with the step of 1MHz)
•
Level of exit: 70 dBµV
•
Built-in amplifier (variation level of entered exit/:
approx. +2 dB)
•
Coupling of the signals antenna
•
Stereo modulation doubles carrying 5,5 + 5,74
MHz
•
Automatic check of the audio level on the modu-
lated signal
•
Level of audio entry: between 100 mV and 10V
•
Respect of the impedances of entries and video
exit (75 Ohms)
Adapator
•
Power pack 230 V/12V/50Hz
•
Consumption: < 5 W
•
Operating temperature: 10 with 50°C
Description
•
Dimensions: 205 X 70 X 43 mm
•
Weight: 270 gr. approx.
Accessory included
•
Power pack
•
Scart cable
•
Note
7