Werbung
Operation
Functionality
The Ultrasonic Marten Repeller generates an acoustic
signal with a frequency of 23 kHz in intervals. This
ultra high frequency is sensed by the martens as
perturbing and nasty, so that they flee from the
corresponding vehicle.
Assembly
The Ultrasonic Marten Repeller can be fixed in the
engine compartment by means of self-tapping screws
or cable ties on the carriage. The connecting cable to
the car battery must be passed in that manner that it
does not get in contact with movable or hot parts (e.g.
ventilating wheel, exhaust manifold). The device
should be installed in the engine compartment in that
manner that the acoustic noise can constantly spread
and is not absorbed by insulating mats.
ATTENTION: Assembling should be carried out by
authorised specialised staff!
Electrical Connection
The device is directly connected to the car battery and
binder 15. The red cable is connected to the positive
pole, the black cable is connected to binder 15, which
you find at the plug for the car radio which is marked
according to the Euro Norm. Having established this
type of connection, the device works only when the
13
Werbung
