Nespresso Aeroccino + Anleitung Seite 4

PArTS
Aeroccino +
2 whisks
Milk frothing
for hot milk
whisk
(for hot and cold
milk froth)
Hot milk
whisk
(for hot milk)
PrePArATion
Tip: Use cold, fresh, full-fat or semi-skimmed milk.
1Underside of the jug must be dry before using the device.
2Plug base into the socket before use. Press main switch located on the base of the
unit to turn on the Aeroccino 3. LED turns green and Aeroccino 3 is ready to use.
3Jug internal side must be cleaned with a cloth suitable for non-stick surfaces.
Jug's maximum level for:
Milk froth 2 Nespresso cappuccino cups
1 Nespresso recipe glass
Hot milk 1 Nespresso recipe glass
Aeroccino 3
Maximum level indicated:
for milk froth
lid
remove
sticker
before first
use
button
jug
base
Preparation Times
Hot milk froth 70 seconds approximately
Cold milk froth 60 seconds approximately
Hot milk 130 seconds approximately
PrePArATion
or
4 Attach relevant
whisk.
Whisk storage
Main switch
Indication LED
cLeAninG AFTer every USe
remove from the base
1
and take off the whisk
(no tools required).
Note: When you have
finished using Aeroc­
cino 3, switch OFF at
the base with the main
switch.
TiPS
5 Pour desired amount Press button to start. Aeroccino
6
of milk up to one of
stops automatically.
the two "max" level For hot preparations, briefly
indicators. press button.
Then place milk jug on For cold milk froth, keep button
to the base. pressed for approx. 2 seconds.
remove Jug is
2 3
water-
the seal from the
lid to clean both proof,
parts. Rinse and but NOT
clean with dishwasher
a damp cloth. safe.
en
clip one of the whisks
4
on to the inner base
of the jug and to avoid
loss, clip the other on
to the lid (or in whisk
storage when using
the Aeroccino 3).