Vivanco WLAN ROUT 54-N Bedienungsanleitung Seite 6

23414
Por t LEDs (WAN)
Port LED (WAN) indic
WAN port.
Act/Link LED
The LED stays light (green) means the port has good linkage to it
vice s.
The LED will blink green when there is traffic transverse the port.
Port LEDs (LAN)
Port LEDs (LAN) indicators locate on the front panel for showing the operating status of
10/100Mbps Fast Ethernet switching ports.
Act/Link LED
Every port has a Act/Link LED. Steady green (link state) indicates that the port has
good linkage to its associated devices. Flashing green indicates that
receiving or transmitting data between its associated devices.
The Rear Panel
Power Connection
Plug the circle end of the power adapter firmly into the rear panel of the Wireless Router,
and the other end put into an electric service outlet th
Pl acement (Optional)
There are three ways to place the Router. The first way is to place the Router horizontally
on a surface. The second way is to attach the router to the wall. The third way is to sta
the Router vertically on a surface. These options are explained in further detail below.
ators locate on the front panel for showing the operating status of
6
WLAN ROUT 54-N
s associated de-
en the system is ready.
the port is
nd