Installation - Xoro HXS911 Bedienungsanleitung

Please read the following instruction carefully:
1. Lift the HXS 911 out of box by opening the top, turning the box over (DO NOT LET
THE NUIT FALL OUT) and sliding the box off of the unit. Do not grab sides, which
may lead to accidental speaker damage.
2. Set the unit on the ground and flip it around until the head rest and seat are facing
the ground.
Mount the HXS 911 Sound Chair:
Step 1: Place swivel base pole into the mounting hole on bottom of seat
Step 2: Use spanner to tighten fastening bolt
Step 3: Open Chair, face it down and secure pin and velcro
Step 4: Flip Chair upright into sitting position
3. Insert pin into closure. Pull and secure the Velcro
4. Review the set up diagrams to familiarize yourself with XOROs components,
accessories and Set-up.
5. Remove all included accessories from the built in storage compartment located
under the chair
6. Carefully turn chair over.
7. Locate the input/output panel at the foot of the seat. Make sure that the control
panel is not more than 3 meters from the audio and 2 meters from power source.
8. Unpack the power adapter and connect it to the main power outlet, then to the
power jack on the control panel (3).
9. Press the power button and confirm that the power Indicator light (2) is on.
10. Follow the connection diagrams to connect the XORO to the audio source of your
choice.
11. Adjust the bass and volume levels to your preference ... start rocking.

Installation

TM
flap to hide pin and closure.
4