Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Regelmessige funksjonstester
Når stikkontakten er i bruk skal det utføres regelmessige funksjonstester, f.eks. en gang i
måneden. Testen kan utføres som følger:
-
Sett bryteren på (1).
-
Trykk på testknappen (TEST). Bryteren skal da sprette tilbake i 0-stilling (0).
-
Skyv bryteren tilbake til (1).
Tekniske spesifi kasjoner
Nominell spenning
Nominell strøm:
Nominell reststrøm:
Kopper og aluminiumsledere kan tilkoples, 1,5...2,5 mm
Omgivelsestemperatur:
Værbestendighet:
Safety socket outlet with integrated residual current device
Product description
The safety socket outlet has an integrated residual current device with protected wire output.
Description of function
The working principle of the safety socket outlet is the same as that of a residual current
device. The fault current protection relates all devices and cables which are connected to the
safety socket outlet. However, the electrical installation up to the socket outlet is not protected
by the safety socket outlet. With the protected wire output it is possible to link up to devices
which then are also residual current protected.
Preparations
If aluminium conductors are to be connected, these are to be scraped and greased beforehand
to protect them against corrosion.
Authorised persons
Installation, connecting and removal work may only be carried out by trained electrical
experts.
Operating test
After installation, it is essential to check the correct functioning of the safety socket outlet.
Thus slide switch into pos. (1) and then press the test button (TEST). The unit must trip
(switch in 0 pos.). In addition, check with a suitable tester whether the socket outlet is actually
swit
.
NOTE!
The safety socket outlet must not be put into use if it has not passed this function test.
6
230 V AC (50-60 Hz)
16 A
30 mA
- 25 - + 40 °C
EN 61008
2
Werbung
