Crosscall X-POWER Bedienungsanleitung Seite 3

RECHARGE FROM THE X-POWER:
1. Insert a USB-C cable, as well as the appropriate plug.
2. Leave to charge, the LED indicator shows the current charge level.
3. During charging, the LED(s) show the level of charge reached,
and the blinking LED shows the current level.
4. When the power bank is charged, all four LEDs stay on.
N.B.: The X-POWER allows a maximum charge current of 5V/2.1 A
Fully recharge the battery every 3 months in the event of non-use.
Checking the battery level using the indicator
1. Briefly press the button
2. The LED indicator gives you the battery level
Battery level
0%-25% 25%-50% 50%-75% 75%-100%