Technical Data - Gardenline YGL N.G. 4140 Originalbetriebsanleitung

• Then cut all the way through the branch with the
second cut (Pos. 2). The third cut (Pos. 3) is a top
cut with which you separate the branch from the
trunk at a distance of 2.5 to 5cm.
5.8 Remaining risks
m DANGER
Mechanical hazards
created by cutting and impact, related to the saw
chain.
Electrical hazards
from contact with parts under high voltage (direct
contact) or parts which have become under high volt-
age under faulty conditions (indirect contact).
Thermal hazards
which can result in burns, scalds and other injuries,
created by possible contact of persons with objects
or materials with high temperature including the radi-
ation of heat sources.
Noise hazards
which can result in hearing losses (deafness) and
other physiological disorders (e.g. loss of balance,
loss of awareness), and interference with auditory
signals and speech communication.
Vibration hazards
which can result in peripheral circulatory and nerv-
ous functional disturbances in the hand-arm system,
such as white finger disease.
• Hazards from contact with or inhalation of harmful
fluids, gases, mists, fumes and dusts related to ex-
haust gases.
• Hazards from unhealthy postures or excessive ef-
forts related to machine use.
• Hazards from unexpected
expected overrun/over-speed
failure/disorder of the control system related to fail-
ure in the handles and position of the controls.
• Hazards from failure of the control system related
to handle strength, position of controls and mark-
ing.
• Hazards from break up (chain) during operation re-
lated to saw chain.
• Hazards from ejection
ids related to chip
spillage.
• Hazards from dropping the chain-saw while work-
ing in a tree.
Risk of injury !
Contact with the saw-chain can lead to fatal cutting
injuries.
Never put your hands into the running saw-chain.
Risk of kickback!
Kickback can lead to fatal cutting injuries.
44 І 56
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
start-up, un-
from
of objects or flu-
discharge and fuel
Risk of burning!
The chain and the guide bar heat up during opera-
tion.
Behaviour during an emergency
Start First Aid measures relevant to the injury and re-
quest medical help as quickly as possible. Prevent
the injured person from further injury and keep him/
her rested. For potentially occurring accidents, the
First Aid kit, according to DIN 13164, should always
be handy at the work place. Material taken from the
First Aid kit must be replaced immediately. When you
are requesting help, give the following information:
1. Location of accident
2. Type of accident
3. Number of injured people
4. Type of injuries
Store all safety notices and instructions for the
future.

6. Technical data

Engine Capacity
Maximum Motor Capa-
city
Cutting Length
Bar Length
Chain Division
Chain Thickness
Idle Speed
Chain Speed Max
Maximum Speed with
Cutting Attachment
Fuel Tank Capacity
Chain oil tank capacity
Anti-vibration function
Toothing sprocket
Chain Brake
Coupling
Automatic chain oiling
Chain with low kick-
back
Weight without bar and
chain
Weight with bar and
chain
Subject to technical changes!
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect work-
ing order.
41 cm³
1.5 kW
37.5 cm
16" (40 cm)
(3/8"), 9.525 mm
(0.05"), 1.27 mm
3100 ± 300 min
-1
21 m/s
min
11000 -1
260 cm³
210 cm³
yes
6 teeth x 9.525 mm
yes
yes
yes
yes
4.5 kg
5.7 kg