StarTech USB2G4LEXT2 Bedienungsanleitung

Quick Start Guide
4 Port USB 2.0 Extender over Gigabit Ethernet or Cat5/6 Cabling - 100m (330ft)
USB2G4LEXT2
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For full operation instructions and specifications, please visit
www.startech.com/USB2G4LEXT2
Packaging Contents
• 1 x USB 2.0 Extender Local Unit
• 1 x USB 2.0 Extender Remote Unit
• 1 x USB A-B Cable
• 1 x Universal Power Adapter
• 3 x Power Cords (NA/UK/EU)
• 1 x Mounting Kit
• 1 x Quick Install Guide
System Requirements
• Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000,
Windows® Server 2012, 2008 R2, 2003(32/64), Windows® CE 6.0,
Mac OS 10.x and Linux
Installation
Note: Before you get started, ensure that all the drivers required for
your USB device(s) are installed.
Network Connect
1. Place the Local Extender where desired and connect the Cat 5e
patch cable from the Link port (RJ45) to a network switch or wall
network port connected to a switch.
For the most up-to-date information, please visit: www.startech.com
2. Connect the Local Extender to the computer using the included
USB cable.
3. Place the Remote Extender where desired. Connect the Cat 5e
patch cable from the Link port (RJ45) to a network switch or wall
network port connected to a switch and connect the Remote
Extender to a power source.
4. Attach USB device(s) to the Remote Extender.
Manual Revision: 10/17/2013