Heating Milk - Bellarom BMAD 550 A1 Bedienungsanleitung

NOTE
If you lift the jug off the base 5 during preparation, the appliance will
►
stop. You will have to restart preparation by pressing the "on/off " button 4.

Heating milk

1) Fit the whisk for uniform heating 7 onto the drive shaft inside the jug.
2) Take the jug from the base 5 and pour the milk in. Fill the jug with milk to
at least the MIN mark inside the jug. Never fi ll it with milk beyond the upper
MAX mark (
3) Place the jug on the base 5.
4) Put the lid 1 on.
5) Press the "on/off " button 4. The integrated control lamp lights up red. The
whisk for uniform heating 7 starts to turn. This ensures that the milk is heated
evenly.
6) The appliance switches itself off and the integrated control lamp goes out as
soon as the milk reaches a temperature of around 65°C.
NOTE
► If you wish to stop the preparation process before completion, press the
"on/off " button 4. If you press the "on/off " button 4 again, preparation
will resume.
7) Take the lid 1 off and pour the hot milk into the desired container.
Wait about 2 minutes before you heat up another portion of milk.
BMAD 550 A1
). Otherwise the appliance may overfl ow.
│
GB 7 ■